Specifications
The housing is made from a single molded opaque black polyethylene body and
two clear injection-molded UVEX covers (cap); there are no glued parts permitted. At 120V
draws approximately 0.62 amps @ 74 watts.
Solid state circuitry on a double circuit board holds
2 pair of 4 watt seconds strobe lamps for rugged and dependable operation. Lamps have an estimated five million flash cycle life.
Unit operates from any 120 volt AC circuit. Plugged into a conventional dimmer (solid state
or auto transformer) the random strobe flash rate can be varied. The unit is supplied with a
black 8 foot, 18 AWG flat AC line cord with strain relief, and a two prong polarized
Edison connector. The frequency of the flash of any GAM Star Strobe can be varied by using
most dimmers. As the voltage is lowered, the flash rate slows. The intensity of each flash is
always at maximum.
REMOTE CONTROLLABLE STAR STROBE™ 'DOUBLE HEAD'
This model allows you to program and control the flash sequence. A pair of control
wires are supplied with each unit. A control signal which can be anywhere between 6 to 24V
AC or DC can be used to trigger the unit.
As manufactured by GAMPRODUCTS INC., Hollywood CA.
|